Archives

loon outdoors nip n sip - flyfishbonehead fly shop

Nip N Sip 2.0

December 21, 2015 3:03 pm Published by

Loon Outdoors Nip N Sip Redesigned for 2015! Now with removable stainless steel cutting jaws capable of cutting even the... View Article

the best fly tying materials at the flyfishbonehead fly shop

Loon Outdoors Soft Head

September 25, 2015 12:50 am Published by

Soft Head is a thick one-part head cement. It is odorless, non-toxic, and dries soft and pliable. Features: Thick head cement Dries soft and pliable Odor free Water based Comes with applicator brush Excellent for building up soft heads and bodies Directions for use: Remove cap. Use supplied applicator brush to apply Soft Head to flies. Replace cap to prevent Soft Head from drying.

loon outdoors hard head - all the best fly tying materials at flyfishbonehead fly shop

Loon Outdoors Hard Head

September 25, 2015 12:03 am Published by

Never mix epoxy again! Hard Head is an odorless, non-toxic, thick head cement perfect for building glossy heads and bodies. Dries hard and glossy. Features: Thick head cement Dries hard and with a high gloss Odor free Water based Comes with applicator brush Excellent for building up heads and bodies Perfect for painting poppers 

Loon Outdoors UV Clear Fly Finish

September 20, 2015 1:16 pm Published by

With less viscosity than the original, UV Clear Fly Finish Thin is perfect for delicate applications, going on thin without sacrificing curing speed and strength. It can be used to make smaller heads, bodies or wing cases, or to make coat a small thread head... the possibilities are endless. Apply Fly Finish to fly while indoors or shaded from the sun. Use applicator and/or rotating vise to form into the ideal shape. Expose to sun light or use Loon's UV Mini Lamp or UV Power Light to cure. In direct sun (or when using Loon's UV Lights) hardening should take approximately 15 seconds. Instantly cures with sunlight or UV lightNeedle tip included for precise applications 1/2 oz bottle

UV FLY TYING - FLYFISHBONEHEAD FLY SHOP

Loon Outdoors UV Fly Tying Kit

September 24, 2015 9:20 pm Published by

With everything a tyer needs to make the move from traditional cements to UV Cure, the UV Fly Tying Kit includes UV Clear Fly Finish Thick, Thin and the brand new, ultra-thin Flow, and a UV Power Light. Features: Includes Thick, Thin and Flow Build fly heads and bodies Instantly cures with sunlight or UV light Various needle tips included for precision tying Directions for use: Apply UV Clear Fly Finish to fly while indoors or shaded from the sun. Use applicator and/or rotating vise to form into the ideal shape. Expose to sun light or use Loon’s UV Mega Light or UV Power Light to cure. In direct sun (or when using Loon’s UV Lights) hardening should take approximately 15 seconds.